|
|
 |
|
JIS |
DL5026-6P3 |
|
AWS |
E8018-C2 |
|
|
|
Description and Applications |
|
Deposited metal contains
approximately 3.50% Ni, providing high notch
toughness at low temperature. Suitable for
welding of low temperature service steels. It
has high deposition rate, beautiful bead
appearance and excellent mechanical properties
and cracking resistance. |
| |
|
Guideline in Usage |
|
1. |
Electrode should be re-dried
at 350
∼
400℃ for 60 minutes. |
|
2. |
Base metal
should be preheated at 100 ∼ 150℃ and stress
relieved heat treatment at 600 ∼ 620℃ for one
hour. |
|
3. |
Keep the arc as short as possible. |
|
|
|
|
|
|
Typical
Chemical Composition of Weld Metal（％） |
|
C |
Si |
Mn |
P |
S |
Ni |
|
0.050 |
0.270 |
0.770 |
0.020 |
0.010 |
3.60 |
|
|
|
|
Typical Mechanical Properties of Weld Metal |
Yield Strength
N/mm2 |
Tensile Strength
N/mm2 |
Elongation
％ |
Impact Value
J(-73℃) |
Post heat Treatment |
|
535 |
613 |
27 |
84 |
620℃ × 1 hr. |
|
|
|
|
Size & Recommended Current Range（AC
) |
|
|
|
2.6 |
3.2 |
4.0 |
4.8 |
5.0 |
|
|
300 |
350 |
350
400 |
350 |
450 |
|
Current (Amp) |
F |
60~90 |
90~140 |
150~200 |
190~230 |
190~240 |
|
V,OH |
50~80 |
80~110 |
120~150 |
140~180 |
140~190 |
|
|
|
|
 |
