|
|
 |
|
|
|
|
Description and Applications |
|
HD150L
is an ilmenite type electrode for all position welding,
especially vertical-up and overhead welding. X-ray
performance and mechanical properties are excellent.
Welding
of parts where the reliability is required, as for
ships, vehicles, buildings, bridges, high-pressure
containers and the other general structures made of mild
steel.
|
|
|
|
Guideline in Usage |
|
1. |
The
electrodes should be re-dried at 70 ～ 120℃ for
30 ～ 60 minutes before use. Excessive moisture
absorption may result in some porosity and more
spatters. |
|
2. |
Pay attention not to exceed the range of proper
currents. Welding with excessive current not
only lowers X-ray performance, but also causes
increase of spatter, undercut and insufficient
slag covering. |
| |
|
|
|
|
|
Typical
Chemical Composition of Weld Metal（％） |
|
C |
Si |
Mn |
P |
S |
|
0.09 |
0.09 |
0.46 |
0.016 |
0.010 |
|
|
|
|
Typical Mechanical Properties of Weld Metal |
Yield Strength
N/mm2 |
Tensile Strength
N/mm2 |
Elongation
％ |
Impact Value
J(-20℃) |
|
400 |
460 |
30 |
84 |
|
|
|
|
Size & Recommended Current Range（AC
) |
|
|
|
2.6 |
3.2 |
4.0 |
5.0 |
6.0 |
|
|
350 |
350 |
400 |
450 |
450 |
|
Current (Amp) |
F |
60~80 |
100~140 |
140~190 |
190~240 |
240~320 |
|
V,OH |
50~70 |
80~100 |
120~160 |
150~200 |
－ |
|
|
|
|
 |
