|
|
 |
|
|
|
|
Description and Applications |
|
H12 is a
high oxide type electrode. Slag detachability,
re-striking and bead appearance are good. For the
welding of thin plates and light steel frames. |
|
|
|
Guideline in Usage |
|
1. |
Electrodes
should be re-dried at 70 ∼ 100℃ for 30∼60
minutes before use. Excessive moisture
absorption lowers usability and may result in
some porosity. |
|
2. |
For
vertical downward welding, keep an angle of
40°∼80° between the base metal and the
electrode. |
|
3. |
If slag
detachability is not good due to welding base
metals with narrow groove, please use lime
Titania type electrodes, ex. NK 32, G03 instead
of this electrode. |
|
|
|
|
|
|
Typical
Chemical Composition of Weld Metal（％） |
|
C |
Si |
Mn |
P |
S |
|
0.08 |
0.38 |
0.39 |
0.015 |
0.010 |
|
|
|
|
Typical Mechanical Properties of Weld Metal |
Yield Strength
N/mm2 |
Tensile Strength
N/mm2 |
Elongation
％ |
|
390 |
465 |
28 |
|
|
|
|
Size & Recommended Current Range（AC） |
|
|
|
2.0 |
2.6 |
3.2 |
4.0 |
5.0 |
|
|
300 |
350 |
350 |
400 |
450 |
|
Current (Amp) |
F |
50∼70 |
70∼100 |
90∼130 |
150∼190 |
200∼240 |
|
V,OH |
45∼60 |
60∼90 |
80∼100 |
140∼170 |
－ |
|
|
|
|
 |
